Brisbane Roof Repairs — Brisbane licensed roofers Call 0468 185 003

Tile Roof Repairs

The dominant roof across Brisbane's post-war suburbs, and the one with the most distinct failure points.

  • Free quote, no obligation
  • Licensed QBCC roofers, checkable on the public register
  • All Brisbane suburbs

Get a free quote

No obligation. Takes 30 seconds.

No obligation. Your details go to one licensed roofer who covers your suburb.

Brisbane Roof Repairs connects Brisbane and greater Brisbane property owners with qualified, connects Brisbane property owners with licensed local roofers for tile roofs. Tell us the roof type and what you're seeing and we'll match it to a licensed roofer who covers your suburb. Written scope and firm price after an inspection.

Ridge capping is what usually fails first

The mortar bedding under the ridge and hip capping cracks and washes out over about fifteen to twenty years in this climate. Once it goes the caps move, water gets under, and the timbers below start to suffer.

Re-bedding and repointing is the single most common tile-roof job here. It's priced by lineal metre of ridge, and it genuinely extends the roof's life rather than just looking better.

Broken tiles and why they broke

Hail is the biggest cause. The second is foot traffic — a tile roof must be walked in specific places and antenna installers, solar fitters and pest inspectors frequently don't know where.

If tiles broke without a storm, ask who has been on the roof recently. It changes who should be paying.

Valley irons rust out of sight

The metal channel where two roof planes meet collects everything the roof sheds — leaves, grit, water — and rusts through from underneath while looking fine from the gutter.

Replacing valleys means lifting tiles along both sides, which is why it costs more than the part suggests. It's also why it gets left too long.

Terracotta vs concrete

Terracotta is on most pre-war and interwar Brisbane housing, doesn't fade, and is brittle — hail cracks it and matching an old profile can be difficult. Concrete is on post-war stock, fades noticeably, and is more forgiving of impact but more porous with age.

They want different repairs and different coatings, so it's the first thing to establish.

Indicative pricing

Where this job typically sits. Access is usually a bigger cost driver than size.

JobIndicative priceWhat moves it
Roof inspection and written report$150 – $400Often credited against the work. Worth paying for on its own if you're making a claim.
Leak trace and repair$300 – $900Finding it is most of the job. A leak rarely enters where it appears inside.
Replace broken/slipped tiles$250 – $650Per section. Matching an older terracotta profile can add to it.
Ridge capping re-bed and repoint$1,200 – $3,500The most common tile-roof repair. Priced by lineal metre of ridge.
Storm and hail damage repair$800 – $8,000Enormous range — depends whether it's a few tiles or a whole elevation.
Gutter replacement$45 – $90 per metreLicensed drainage work at any value. Includes brackets and fall correction.
Downpipe replacement$150 – $400 eachMore where it connects to underground stormwater.
Metal roof screw replacement / re-fastening$800 – $3,000Very common on older Queenslanders. Much cheaper than re-roofing.
Roof restoration — tile$3,500 – $9,000Clean, re-bed, repoint and coat. Cosmetic plus sealing, not structural.
Full re-roof — tile to Colorbond$15,000 – $35,000Depends on size, pitch, access and whether battens need replacing.
Skylight or whirlybird install$400 – $1,200Each, fitted and flashed.
Emergency tarp / make safe$300 – $900After hours during storm season. Buys time until a proper repair.

Prices are indicative only. What a roof costs depends on its type, its pitch, access, how much of it is affected and whether the damage runs into the battens or ceiling. You get a firm written price after an inspection.

Other roofing services across Brisbane

Talk to a licensed Brisbane roofer

Tell us the suburb and the roof type and we'll get it to the right person.

Call 0468 185 003